ROOF COATINGSilicone & Acrylic

Restoring a Inner Richmond low-slope roof means fixing what is wrong first, then coating the whole surface seamless. Salt air, marine layer and long damp mornings keep a low-slope roof wet longer, so seams and ponding spots are where the trouble starts.

The honest version

Coating is not for every roof. If the deck is soft, the insulation is wet or the membrane is finished, a coating only hides the problem — we will tell you the Inner Richmond roof needs replacing instead.

Lifespan and recoating

A silicone system at the right thickness over a properly prepped roof gives you ten years and up, and acrylic is close behind on a roof that drains well. Both systems are renewable: when the time comes you wash the roof and add another coat instead of starting over, which is why building owners keep coming back to them.

Serving Inner Richmond and nearby

We coat commercial and residential low-slope roofs throughout Inner Richmond and the surrounding San Francisco County communities, including Richmond District, Presidio Heights and Laurel Heights.

How we coat a roof in Inner Richmond

• Inspect and measure, including core tests where we need to know what is under the membrane
• Clean the roof — power wash, remove dirt, chalk and loose coating
• Repair: cracks, open seams, failed flashing, blisters and bad penetrations
• Prime where the substrate calls for it
• Apply the coating in multiple passes to the specified thickness, seams and details first
• Final walk for even coverage and thickness, then clean up the site

The things that actually matter

If the attic has no real intake, we fix that rather than leaving a new roof to bake.

• We do not ask for large deposits before material is delivered.
• Keep the paperwork: it transfers if you sell the house.
• Rake and eave metal is new on every job; reusing bent metal is false economy.
• Synthetic underlayment goes down over the whole deck, not just the valleys.

What we look for on a Inner Richmond roof

We usually recommend coating when the roof shows:

• Seams and laps that have opened up and started weeping
• Low spots that hold water for days after a storm
• A roof with years left in the deck and insulation underneath
• A building that cooks in summer and runs the air conditioning hard
• Flashing and penetrations that leak while the field of the roof is still solid

What roof coating costs in Inner Richmond

Because the work is additive, most buildings stay open and in use while we are on the roof.

A coating runs well under the cost of a tear-off and replacement, and there is no dumpster, no demolition and no days of noise over the tenants' heads.

Choosing the system for your Inner Richmond roof

• Silicone: the pick for roofs that pond. It handles standing water, resists UV without turning brittle, and lasts longest of the two.
• Acrylic: the pick for roofs that drain clean. Lower cost per square, excellent reflectivity, and easy to recoat later.
• Both go down seamless, so there are no laps or fasteners for water to work into.
• Both drop the roof surface temperature sharply, which shows up on the cooling bill of a conditioned building.

Ready to look at your roof

The estimate is free. Call (818) 275-0921 and we will measure your Inner Richmond roof, check the deck, seams and drains, and tell you plainly whether coating is the right call.

What changes on a Inner Richmond roof

Before materials come into it, the site decides the job: in Inner Richmond, onshore wind drives rain sideways into the flashings. At about 339 miles northwest, Inner Richmond is an easy run for us, inspection or emergency.

We are often working Richmond District, Presidio Heights and Laurel Heights in the same week, which keeps costs sensible.

• We protect landscaping and the pool before a single bundle comes off the truck.
• Solar panels get detached and reset on a schedule that matches the roofing crew.
• We photograph every penetration before and after, so the file shows the work.
• Gutters are pulled and refitted where they block a proper drip edge.
• Satellite dishes and A/C line sets are re-flashed, not just set back down.

Leaks found in summer cost a fraction of the same leak found in February. You get photos, measurements and a plain explanation before any work is booked.