Licensed | Insured | Family Owned & Operated
(818) 275-0921 CALL NOW · OPEN 7 DAYS
Our 2-ply Polyfresko torch down roofing systems provide long-lasting, waterproof protection for flat and low-slope roofs. Designed for durability and performance, this system is ideal for residential, multi-family, HOA and commercial buildings across Los Angeles, Los Angeles and Southern California. Waterproof protection, durable and long lasting, UV and heat resistant, ideal for flat roofs, professional installation.
RESIDENTIAL HOMES
APARTMENTS & HOAs
COMMERCIAL BUILDINGS
LOW-SLOPE ROOFS

LOS ANGELES, CA
Two Plies, Welded Seams, No Guesswork.
Torch down roofing in Los Angeles is modified bitumen, installed in two plies and heat-welded as it goes down: a base sheet torched to the prepared deck or cover board, then a white Polyfresko cap sheet over it. The seams fuse instead of relying on adhesive, which is why the system holds up on flat and low-slope roofs that see standing water.
All American Roof Repair & Commercial Roofing installs and repairs torch down on houses with flat sections, apartment buildings, HOA property, offices and light industrial across Los Angeles, Tujunga, Shadow Hills, Lake View Terrace and the northeast San Fernando Valley.
Los Angeles sits in a bowl at the foot of the Verdugo and San Gabriel Mountains and it bakes. A dark flat roof here runs far hotter than the air, the daily swing works every lap, and the fall winds drive grit across the surface. Then the rain arrives in short, heavy bursts and finds whatever the summer loosened: a split lap, a lifted edge, a drain that has not been cleared since the last storm.
The old roof comes off and any soft decking is replaced before a new sheet touches it. You see the bad bays before they are covered.
Where the building wants R-value, polyiso goes down; otherwise a cover board gives the torch a sound, even surface.
The modified bitumen base ply is torched and rolled so the whole sheet bonds, not just the edges.
The white cap ply goes over it, seams welded and probed. White means the roof reflects heat instead of storing it.
Curbs, pipes, parapets, edge metal and drains are detailed last, because that is where flat roofs actually leak.
Straight talk: torch down is hot work. We carry the permits and insurance for it, run a fire watch and keep extinguishers on the roof. Where open flame is not appropriate — a wood deck in poor condition, an occupied building with tight access — we quote a cold-applied or coating system instead and say why.
If the roof is flat or low-slope, torch down is on the table:
Additions, garages and mid-century flat roofs where shingles were never the answer.
Staged section by section so tenants stay put and the lot stays usable.
Offices, retail and light industrial, scheduled around your hours.
Shallow pitches where water moves slowly and details decide everything.
The same roof, cracked and ponding, then two plies down with a white cap sheet.


Installed to spec, a two-ply torch down roof runs twenty years and up, and the manufacturer warranty is written for 10, 20 or 25 years depending on the system we specify. The paperwork is registered in your name, not left in a folder. We check the roof after the first rainy season so small things stay small.
Most calls start with a leak over one room. We trace it to the source — a split lap, a failed pipe flashing, a drain that never cleared — repair it and photograph what we found. Two things keep a flat roof going: clear the drains before the rains, and have the flashings looked at once a year.
We install and repair torch down throughout Los Angeles, Tujunga, Shadow Hills, Lake View Terrace, La Crescenta, Sylmar and the rest of the northeast San Fernando Valley. Flat roof work is dry-weather work, so the calendar tightens once the rain starts — call early.
We’ll measure the roof, check the deck, drains and flashings, and tell you whether torch down is the right system.
Everything below is the same crew, same city, same free inspection.
TORCH DOWN ROOFING LOS ANGELES, CA
Flat roofs in Los Angeles fail at the laps and the details, which is why we install torch down in two plies with every seam heat-welded. Inland heat and seasonal wind work every lap, so the welds and the flashings are where the money belongs.
The practical reasons it keeps getting specified here:
Drone shots cover the steep sections, and the rest is checked on foot.
We install and repair torch down roofs throughout Los Angeles and the surrounding Los Angeles County communities, including Vernon, Huntington Park and Maywood.
We price deck repair per sheet so there is no surprise number halfway through the tear-off.
Access matters too: a roof you can only reach by ladder and bucket takes longer than one with a loading zone.
If the insulation is wet, no membrane fixes that - it comes off first, whatever it costs.
Installed to spec, a two-ply torch down roof runs twenty years and up. The manufacturer warranty is written for 10, 20 or 25 years depending on the system, and we register the paperwork in your name.
The estimate is free. Call (818) 275-0921 and we will measure your Los Angeles roof, check the deck, laps and drains, and tell you plainly whether coating is the right call.
Roof life in Los Angeles is decided by exposure more than brand, and the wind arrives dry and loaded with grit that scours the surface. We cover Los Angeles from about 1 miles east, close enough for emergency calls.
You will see our trucks in Vernon, Huntington Park and Maywood on the same run.
Book in the dry months and the whole job happens on dry decking. We will tell you if the roof has five years left, because that is also useful to know.
Price follows the roof, not a rate card: access, pitch, material, how many layers come off and what the deck looks like underneath. We measure in person, show you photos and put the number in writing before anything is booked.
We do not use subcontract crews we have never met. The people on your Los Angeles roof are the people we train, and they carry our workers' compensation.
A roof is a system. The membrane or shingle gets the attention, but the underlayment, the fasteners, the edge metal and the ventilation decide whether it reaches its warranty.
FREQUENTLY ASKED
Find answers to common questions about torch down roofing in Los Angeles.
CLEAR ANSWERS. LOCAL EXPERTISE.
LOS ANGELES, CA TORCH DOWN ROOFING
Yes. The inspection and the written estimate are free, including a second opinion if you already have a quote in hand. We photograph what we find and walk you through it.
We carry the permits and insurance for hot work, run a fire watch and keep extinguishers on the roof. Where open flame is not appropriate we quote a cold-applied or coating system instead.
Cost depends on the size and pitch of the roof, the material you choose, how many layers come off and what the deck looks like underneath. We inspect the Los Angeles property, measure it and put a detailed number in writing before anything is booked.
Yes, licensed, bonded and insured, with workers' compensation on every crew. Certificates are available before work starts.
A modified bitumen base sheet torched to the deck or cover board, with a white Polyfresko cap sheet over it. The white surface reflects heat instead of holding it.
For most flat and low-slope roofs in Los Angeles, yes. Two plies of modified bitumen with heat-welded seams handle ponding and UV far better than patching.
Yes. Panels are detached and reset on a schedule that matches the roofing crew, and the penetrations are re-flashed properly when they go back.
Installed to spec, twenty years and up, with a manufacturer warranty of 10, 20 or 25 years depending on the system.
If you are on the edge of Los Angeles, these are the neighbours we also serve:
We cover Vernon, Huntington Park, Maywood, Bell and Glendale from the same yard as Los Angeles. One call covers any of them.
Everything below is the same crew, same city, same free inspection.