SHINGLEROOFING

What the street looks like in Lakeside

Before materials come into it, the site decides the job: in Lakeside, the wind arrives dry and loaded with grit that scours the surface. Our shop sits about 125 miles southeast of Lakeside, so a crew is on site the same morning.

Neighbouring work in Santee, El Cajon and Alpine means materials are already staged nearby.

• Tear-off debris leaves the same day; nobody is left with a pile over the weekend.
• Magnet sweeps run morning and evening, which matters on a street with kids and bare feet.
• Solar gets detached and reset by a licensed crew, not improvised around.
• We photograph every penetration before and after, so the file shows the work.
• Satellite dishes and A/C line sets are re-flashed, not just set back down.

Summer is for planned work; winter is for emergencies nobody planned. We will tell you if the Lakeside roof has years left in it rather than sell you a new one.

Questions Lakeside owners ask us

We check the attic as well as the roof; half of what we find shows from underneath.

• Rake and eave metal is new on every job; reusing bent metal is false economy.
• Ice-and-water goes in at the valleys and penetrations even though it rarely freezes here.
• Ridge venting goes in where the roof line allows it, with proper intake at the eaves.
• Nothing is left on the lawn overnight, and the dumpster goes when the job ends.

On the ground in Lakeside

The short version for Lakeside: the weather here punishes details, not products. Lakeside is around 125 miles southeast of the shop, which keeps scheduling simple.

We are in Santee, El Cajon and Alpine constantly, and the housing stock is much the same.

• Material is delivered the morning of the job, not left on the driveway for a week.
• Magnet sweeps run morning and evening, which matters on a street with kids and bare feet.
• Chimney and wall flashings are replaced, not painted over with sealant.
• Satellite dishes and A/C line sets are re-flashed, not just set back down.
• Skylights are re-flashed as part of the job rather than quoted as an extra later.

Scheduling before the rains means the whole job happens on dry decking. The first step is a free look at the Lakeside roof and a number you can hold us to.

Details that decide a Lakeside roof

Edges are fastened to spec because that is where uplift starts.

• Underlayment is where corners get cut; we use the system the manufacturer warrants.
• Moisture readings go in the report where a leak is suspected but not obvious.
• Change orders are written and signed, never verbal.
• The site is cleaned daily, and the last magnet pass happens before the crew leaves.

CALL (818) 275-0921 REQUEST A FREE INSPECTION